Whether it's a combat crash or a rough landing, nothing
bounces back like a TuffWing. It's made of super strong EPP foam and
it's reinforced with five carbon fiber spars for all out hi-speed
flying. You can can even mount your GoPro form camera and make 3D maps.
- EPP foam wings, CoroPlast accessories, carbon fiber
spars, and light weight make the TuffWing incredibly durable.
- Assembles in about 2 hours. Pre-painted, pre-hinged, servo holes
pre-cut, control rods pre-cut with Z bends, motor mount pre-drilled,
builds with CA.
- Downward facing GoPro mount lets you take great still photos for 3D
maps. You can stitch your photos together with
Pix4D Discovery.
- Long battery life - 12 minutes at wide open throttle, or 30
minute relaxed flight times with a 2200 mAh LiPo.
- 100 plus MPH right out of the bag. CAD designed and CNC cut
parts ensure a precision fit.
- High contrast paint scheme makes it easy to see your Tuffwing and
distinguish its top from bottom.
- Complete build
documentation.
- Made in Texas, USA.
$69.95
Specifications
Wingspan: |
32" (81 cm) |
Weight - Fully loaded: |
19 oz. (538 g) |
Material: |
EPP foam, carbon fiber tubes,
Coroplast, plywood |
Battery: |
3S 2200 mAh |
Motor: |
NTM 2836 2200KV |
ESC: |
At least 50 amp |
Servos: |
9 gram mini (Corona
929, HXT 900) 55) |
Propeller: |
APC 7x4E |
Launch method: |
Hand launch |
Gallery
Five carbon fiber spars
slide into precision CNC cut holes aligning the wing halves
and ensuring the the plane is rigid.
Built in mount for downward facing GoPro.
Get great shots of the action below.
Servos and control linkages are located on the top of the
wing, where they belong so you don't have to worry about
damaging them when landing.
|