# rtkpost options (2017/06/07 15:36:11, v.2.4.3 Emlid b27) pos1-posmode =kinematic # (0:single,1:dgps,2:kinematic,3:static,4:static-start,5:movingbase,6:fixed,7:ppp-kine,8:ppp-static,9:ppp-fixed) pos1-frequency =l1 # (1:l1,2:l1+l2,3:l1+l2+l5,4:l1+l5) pos1-soltype =combined # (0:forward,1:backward,2:combined) pos1-elmask =5 # (deg) pos1-snrmask_r =off # (0:off,1:on) pos1-snrmask_b =off # (0:off,1:on) pos1-snrmask_L1 =0,0,0,0,0,0,0,0,0 pos1-snrmask_L2 =0,0,0,0,0,0,0,0,0 pos1-snrmask_L5 =0,0,0,0,0,0,0,0,0 pos1-dynamics =on # (0:off,1:on) pos1-tidecorr =off # (0:off,1:on,2:otl) pos1-ionoopt =brdc # (0:off,1:brdc,2:sbas,3:dual-freq,4:est-stec,5:ionex-tec,6:qzs-brdc,7:qzs-lex,8:stec) pos1-tropopt =saas # (0:off,1:saas,2:sbas,3:est-ztd,4:est-ztdgrad,5:ztd) pos1-sateph =brdc # (0:brdc,1:precise,2:brdc+sbas,3:brdc+ssrapc,4:brdc+ssrcom) pos1-posopt1 =off # (0:off,1:on) pos1-posopt2 =off # (0:off,1:on) pos1-posopt3 =off # (0:off,1:on,2:precise) pos1-posopt4 =off # (0:off,1:on) pos1-posopt5 =on # (0:off,1:on) pos1-posopt6 =off # (0:off,1:on) pos1-exclsats = # (prn ...) pos1-navsys =15 # (1:gps+2:sbas+4:glo+8:gal+16:qzs+32:comp) pos2-armode =fix-and-hold # (0:off,1:continuous,2:instantaneous,3:fix-and-hold) pos2-gloarmode =on # (0:off,1:on,2:autocal,3:fix-and-hold) pos2-bdsarmode =on # (0:off,1:on) pos2-arfilter =off # (0:off,1:on) pos2-arthres =3 pos2-arthres1 =0.9999 pos2-arthres2 =0.25 pos2-arthres3 =0.1 pos2-arthres4 =0.05 pos2-arlockcnt =200 pos2-minfixsats =2 pos2-minholdsats =2 pos2-arelmask =0 # (deg) pos2-arminfix =10 pos2-armaxiter =1 pos2-elmaskhold =0 # (deg) pos2-aroutcnt =5 pos2-maxage =40 # (s) pos2-syncsol =off # (0:off,1:on) pos2-slipthres =0.05 # (m) pos2-rejionno =30 # (m) pos2-rejgdop =30 pos2-niter =1 pos2-baselen =0 # (m) pos2-basesig =0 # (m) out-solformat =llh # (0:llh,1:xyz,2:enu,3:nmea) out-outhead =on # (0:off,1:on) out-outopt =on # (0:off,1:on) out-timesys =gpst # (0:gpst,1:utc,2:jst) out-timeform =hms # (0:tow,1:hms) out-timendec =3 out-degform =deg # (0:deg,1:dms) out-fieldsep = out-outsingle =off # (0:off,1:on) out-maxsolstd =0 # (m) out-height =ellipsoidal # (0:ellipsoidal,1:geodetic) out-geoid =internal # (0:internal,1:egm96,2:egm08_2.5,3:egm08_1,4:gsi2000) out-solstatic =all # (0:all,1:single) out-nmeaintv1 =0 # (s) out-nmeaintv2 =0 # (s) out-outstat =off # (0:off,1:state,2:residual) stats-eratio1 =100 stats-eratio2 =100 stats-errphase =0.003 # (m) stats-errphaseel =0.003 # (m) stats-errphasebl =0 # (m/10km) stats-errdoppler =10 # (Hz) stats-stdbias =30 # (m) stats-stdiono =0.03 # (m) stats-stdtrop =0.3 # (m) stats-prnaccelh =10 # (m/s^2) stats-prnaccelv =10 # (m/s^2) stats-prnbias =0.0001 # (m) stats-prniono =0.001 # (m) stats-prntrop =0.0001 # (m) stats-prnpos =0 # (m) stats-clkstab =5e-12 # (s/s) ant1-postype =llh # (0:llh,1:xyz,2:single,3:posfile,4:rinexhead,5:rtcm,6:raw) ant1-pos1 =90 # (deg|m) ant1-pos2 =0 # (deg|m) ant1-pos3 =-6335367.6285 # (m|m) ant1-anttype = ant1-antdele =0 # (m) ant1-antdeln =0 # (m) ant1-antdelu =0 # (m) ant2-postype =rinexhead # (0:llh,1:xyz,2:single,3:posfile,4:rinexhead,5:rtcm,6:raw) ant2-pos1 =0 # (deg|m) ant2-pos2 =0 # (deg|m) ant2-pos3 =0 # (m|m) ant2-anttype = ant2-antdele =0 # (m) ant2-antdeln =0 # (m) ant2-antdelu =0 # (m) ant2-maxaveep =0 ant2-initrst =off # (0:off,1:on) misc-timeinterp =off # (0:off,1:on) misc-sbasatsel =0 # (0:all) misc-rnxopt1 = misc-rnxopt2 = misc-pppopt = file-satantfile = file-rcvantfile = file-staposfile = file-geoidfile = file-ionofile = file-dcbfile = file-eopfile = file-blqfile = file-tempdir = file-geexefile = file-solstatfile = file-tracefile =